Oil & Gas
Take a look at our selection of customer stories from the Oil and Gas sector. To find out more about what we've done in this industry in the recent past, get in touch with an engineer today.
Next day seals for critical O&G ball valves
A major offshore gas producer in the North Sea required immediate replacement of ball valve sealing components on an HP gas compression line.
Improving ED cycles and safety on reciprocating compressors
Three North Sea floating platforms faced closure due to gas leaks on reciprocating compressors. Could PPE keep the platforms open with the correct choice of sealing material and geometry?
Critical oil and gas seals made, tested and delivered in four hours
A blue chip oil and gas company urgently required O-rings, PTFE ball seats and PEEK wear seats for high temperature valves on an offshore platform.
Material selection and seals manufactured to order; all in less then 2 weeks
A global exploration and production company focusing on Upstream applications kept experience seal failure with standard FKM elastomer.
PPE extends ED cycles and improves safety for high pressure compressors
HSE closure of three platforms due to gas leaks caused by OEM seal failure averted by switching to PPE's EnDura L-seals.
Rapid redesign of compressor seals for North Sea platform
Failed cord seal on gas platform is replaced with EnDura O-ring saving £1000s in lost production and increasing seal life performance.
Red Spider goes deep with EnDura® ED resistant seals
Hydraulic RED is first to achieve ISO14310 V1 with EnDura O-ring seals
Authentic seal spec protects against poor performance
Oil leak in hose assembly leads to concerns about OEM seal spec. O-rings replaced and standardized with EnDura V91A for all valves on topside.
Cost savings for SECC stab connectors
PPE provides critical low temperature FFKM seals that ensure safety and environmental protection for disconnect valves in breakaway connectors.
High Performance Seal Material Improves High Pressure Safety
Two 4-cylinder and four 6-cylinder HOS reciprocating compressors located on three offshore platforms were experiencing gas leaks, which caused major safety concerns.