+44 (0)1254 295400

Spring Seals (S-seals)

Spring Seal DiagramSpring Seal (also known as S-seals and all-in-one T-seals) is a double acting static seal, comprising of a high modulus elastomer and two integrated anti-extrusion springs.

The springs used are manufactured with no initial tension so that the coils are free to open to allow for rubber penetration during molding. The same mechanism allows the spring to respond to pressure fluctuations during operation to close clearances in the metalwork and ensure extrusion of the elastomer is prevented.

Spring seals are symmetrical in their cross section and so they can be used in both rod or piston grooves. Piston type Spring Seals feature an external sealing bulb, or a rod type Spring Seals features an internal sealing bulb.

Steel springs, either Inconel Alloy or Stainless steel 316 offer optimum strength, however PEEK springs are ideal for low wear applications where metal-to-metal contact with the housing is a concern.

FS seals are recommended as an alternative to Spring Seals for use against rough casing and when there is a large clearance between the mating parts of the wellhead.  An FS seal typically has a larger cross section than a Spring Seal to increase the sealing force on the casing while the recess in the seal back controls the radial compression on the seal by allowing it to deflect when in contact with a larger or out-of-round casing section.

  • Typical Applications

    Most commonly used to effectively seal in applications that are subject to:

    • Large clearance gaps
    • High pressure (bi-directional)
    • Remote hardware makeup
    • Restricted access for seal installation
    • Chemical attack by oilfield media
  • Materials

    Spring Seals include the following elastomers families:

    • FFKM - Perlast® and Perlast® ICE
    • FKM - EnDura®
    • HNBR - EnDura®
    • NBR

    And the following spring materials:

    • Stainless Steel 302
    • Inconel Alloy 600

    All combinations of the above elastomers and springs are available in both Piston and Rod variants.

  • Geometry Detail

    Internal Diameter of Piston Type Spring Seal

    Internal Diameter of Rod Type Spring Seal

Spring seal sizes

Elastomer Material Spring Material Inner Diameter (inch) Cross Section (inch) Axial length (inch) Type PPE part no. BHGE part no.
G90LT (FFKM) Inconel 00 00 00 Piston G90LT PS-017450-0575-0840-IN 00000
V91A (FKM) Inconel 00 00 00 Piston V91A PS-014660-0770-0980-IN 00000
V91K (FKM) Inconel 00 00 00 Piston V91K PS-005340-0550-0650-IN 00000
Z95X (HNBR) Stainless Steel 00 00 00 Rod Z95X RS-020959-0695-1080-SS 00000
V91K (FKM) Stainless Steel 00 00 00 Piston V91K PS-026165-0699-0890-SS 00000
Z85L (HNBR) Stainless Steel 00 00 00 Piston Z85L PS-025972-0699-1080-SS 00000
Elastomer Material Spring Material Inner Diameter (inch) Cross Section (inch) Axial length (inch) Type PPE part no. BHGE part no.
Join our mailing list to receive the quarterly PPE enewsletter and be the first to know about all the latest news
Thanks for joining our enewsletter mailing list.

We'll need some basic details first

Please provide a valid email address to access the datasheet

* Don’t worry we won’t spam you and you can unsubscribe at any time.