Packers
Elastomer Packers manufactured for the Baker Hughes Oilfield Services sector are specially designed to withstand hostile downhole environments and produce the required isolation in Oil wells seen in exploration, drilling, and well-service applications.
The downhole sealing device is used in almost every completion to isolate the annulus from the production conduit, enabling controlled production, injection or treatment.
The Packer assembly incorporates a means of securing the packer against the casing or liner wall, such as a slip arrangement, and a means of creating a reliable hydraulic seal to isolate the annulus, typically by means of the expandable elastomeric element. Packers are classified by application, setting method and possible retrievability.
We supply a wide range of packer types including:
- Removable Packers
- Permanent Packers
- Completion Packers
- Compression-set/Mechanical Packers
To help you define what type of Packer you may require for your application, we recommend that you consider the life-span, pressure rating and swelling time needed.
-
Production and Test Packers
The characteristics of a Production or Test elastomeric Packer involve the outside diameter expanding, by being squeezed between two plates, forcing to bulge outward. Production or Test Packers are set in cased holes, whereas inflatable Packers are used in open or cased holes.
-
Swelling or Inflatable Packers
The characteristics of a Swelling or Inflatable elastomeric Packer is achieved by pumping the appropriate swelling agent into a bladder (aromatic hydrocarbons or saline water), in much the same fashion as balloon, but having a much more robust construction. These types of packers have historically-proven to replace traditional mechanical packers and cement.
-
Typical Applications
- High temperature, High pressure (HTHP)
- Squeeze cementing
- Formation fracturing
- Well testing operations
- Well servicing
- Well stimulation
- Well remedial treatment operations
-
Application Challenges
- Temperature extremes
- High pressures
- Extrusion resistance
- Corrosion resistance
- RGD (Rapid Gas Decompression) resistance
- Chemical compatibility including H2S
- Abrasion resistance
Ask a question
How might we be able to help you?
Other Products for Baker Hughes Oilfield Services
Below is a selection of the most common products we supply to the Baker Hughes Oilfield Services sector. Click on a specific product to find out further information.
