Welcome to the Engineers Hub
New to the Hub?
Gain access to all our member exclusive content and benefits by using the form below
Oil & Gas Materials Matrix
| Material family | HNBR | FKM | FFKM | |||
| PPE / EnDura® / Perlast® / Perlast® ICE Grades | Z95X NT | V91A Ultra LT | V91K LT | G92E NT | A90H HT | |
| TR10 (°C / °F) | ISO 2921 | - | -46/-51 | -33/27 | -8/18 | - |
| Maximum Seal Temperature (°C / °F) | 180/356 | 225/437 | 225/437 | 260/500 | 250/482 | |
| Hardness (IRHD) | ISO 48 | 87 | 93 | 91 | 89 | 94 |
| Tensile Strength at break (MPa) | ISO 37 | 35 | 17 | 24 | 28 | 24 |
| Elongation at break (%) | ISO 37 | 215 | 105 | 150 | 93 | 117 |
| Modulus at 50% elongation (MPa) | ISO 37 | 6 | 9 | 7 | 17 | 15 |
| Modulus at 100% elongation (MPa) | ISO 37 | 15 | 16 | 16 | n/a | 22 |
| Compression set (%): | ISO 815 | |||||
| After 24hrs at 150°C | 20 | n/a | n/a | n/a | n/a | |
| After 24hrs at 200°C | n/a | 19 | 15 | 24 | 32 | |
| After 350hrs at 200°C | n/a | n/a | n/a | 35 | n/a | |
| Compatibility in Individual Chemicals | ||||||
| Acids | No | Yes | Yes | Yes | Yes | |
| Amines | Yes | No | No | Yes | Yes | |
| Ammonia | Yes | No | No | Yes | Yes | |
| BTEX | No | Yes | Yes | Yes | No | |
| Chlorides | No | Ph<8 | Ph<8 | Yes | Yes | |
| Corrosion Inhibitors | Yes | Ph<9 | Ph<9 | Yes | Yes | |
| Formates | Yes | Yes | Yes | Yes | Yes | |
| Hydrocarbon gases | Yes | Yes | Yes | Yes | Yes | |
| Hydrocarbon oils | Yes | Yes | Yes | Yes | Yes | |
| CO2 | Yes | Yes | Yes | Yes | Yes | |
| H2 | Yes | Yes | Yes | Yes | Yes | |
| Lubricants | Hydrocarbon | Yes | Yes | Yes | Yes | Yes |
| Silicone | Yes | Yes | Yes | Yes | Yes | |
| Fluorinated | Yes | No | No | No | No | |
| Methane | Yes | Yes | Yes | Yes | Yes | |
| Methanol (100%) | Yes | Yes | Yes | Yes | Yes | |
| N2 | Yes | Yes | Yes | Yes | Yes | |
| Sea Water | Yes | Yes | Yes | Yes | Yes | |
| Polyalkylene Glycols | Yes | Yes | Yes | Yes | Yes | |
| Sour Fluids | H2S in ppm Levels | Yes | Yes | Yes | Yes | Yes |
| 2% H2S | Yes | Yes | Yes | Yes | Yes | |
| 25% H2S | No | Yes | Yes | Yes | Yes | |
| Steam | <130°C | Yes | Yes | Yes | Yes | |
| Industry Compliance and Approvals | ||||||
| NORSOK M710 Rev 2 - Section 7.2 - Sour Gas | Yes | Yes | Yes | Yes | Ask PPE | |
| NORSOK M710 Rev 2 - Section 7.3 - Explosive Decompression | Yes | Yes | Yes | Yes | Yes | |
| ISO 23936-2 Rapid Gas Decompression | Yes | Yes | Yes | Ask PPE | Yes | |
| TOTAL GS PVV 142 Appendix 8 - Explosive Decompression | Yes | Yes | Yes | Yes | Yes | |
| NACE TM0297 Section 7.41 - Explosive Decompression | Yes | Yes | Yes | Yes | Yes | |
| NACE TM0187 - Sour Gas | Yes | Yes | Yes | Ask PPE | Ask PPE | |
| API 6A / ISO 10423 F1.13.5.2 Class DD/EE | Yes | Yes | Yes | Yes | Ask PPE | |
| API 6A / ISO 10423 F1.13.5.2 Class FF/HH | Ask PPE | Yes | Yes | Yes | Ask PPE | |
NB: The information provided is to the best of our knowledge accurate and reliable and is intended to be used for guidance only. It is the customer's responsibility to evaluate parts prior to use, especially in applications where their failure may result in injury and/or damage. For specific conditions and applications, please consult PPE.
| Key | |
| Ultra LT | Ultra Low Temperature |
| LT | Low Temperature |
| NT | Normal Temperature |
| HT | High Temperature |
