PPE Elastomers for Baker Hughes Oilfield Services
The first table below shows the PPE elastomer material grades that are approved for use by Baker Hughes Oilfield Services.
The second table below is a range of PPE elastomer materials not approved by Baker Hughes Oilfield Services, but we would recommend considering for your oil & gas application.
We always recommended that you contact PPE prior to choosing an elastomer grade, as we can advise on the most suitable material for your given application.
| OFS Approved Oil & Gas Elastomers | ||||||||
| Baker Hughes Specification | Baker Hughes Grade | PPE Grade | Material Type | Typical Hardness Range (Shore A) | Temprature Range | Key Attributes | Certification & Approvals | |
| Min | Max | |||||||
| BPS B901 BPS D901 BPS E902 BPS E903 | APT 30 APT 800 APT 10C APT 10S | V81BR | FKM | 81 | -20°C (-4°F) | +204°C (+400°F) |
|
|
| BPS B901 BPS D901 BPS E902 BPS E903 | APT 40 APT 900 APT 20C APT 20S | V91BR | FKM | 93 | -18°C (-7°F) | +204°C (+400°F) |
|
|
| BPS B301 | BAC40 | G92E | FFKM | 89 | -15°C (+5°F) | +260°C (+500°F) |
|
|
| EL07 | FFKM75 | G75TX | FFKM | 75 | -15°C (+5°F) | +270°C (+518°F) |
| - |
| PPE Recommend Oil & Gas Elastomers | ||||||
| PPE Grade | Material Type | Typical Hardness Range (Shore A) | Temperature Range | Key Attributes | Certification & Approvals | |
| Min | Max | |||||
| G90LT | FFKM | 90 | -46°C (-51°F) | +240°C (+464°F) |
|
|
| V91A | FKM | 92 | -51°C (-60°F) | +225°C (+437°F) |
|
|
| V91K | FKM | 90 | -41°C (-42°F) | +225°C (+437°F) |
|
|
| A90H | FEPM/Aflas® | 94 | 0°C (+32°F) | +250°C (+482°F) |
|
|
| Z85L | HNBR | 85 | -50°C (-58°F) | +160°C (+320°F) |
|
|
| Z95X | HNBR | 87 | -29°C (-20°F) | +180°C (+356°F) |
|
|
Ask a question
Do you want to find out about a specific elastomer material? Send us an enquiry now and we aim to respond within 24 hours.